2012 MINI STOCK RULES         

CAR REQUIREMENTS

1. 4 cylinder only. no convertibles. no aftermarket bodies allowed.

2. All glass must be removed. Must have screen in place of windshield.

3. All doors must be welded, chained or bolted shut.

4. All cars must have number of both doors and on top (18" or larger)

5. No 4 wheel drives or all wheel drives.

6. Must be fuel injected.

7. Stock wheels or racing wheels ok. 7" max width. No homemade wheels allowed.

8. Stock appearing motors. No porting or polishing. Headers are allowed.

9. No tube chassis

SAFETY RULES

1. All drivers must wear helmets, seat belts and long sleeve shirts and pants.

2. Window nets mandatory

3. All cars must have working fire extinguisher

ROLL BAR AND CAGE INSTALLATION

1. Must be built from steel tubing (no pipe of any kind) min 1 1/2" od x .095" wall thickness. All tubing must be mandrel bent and welded with arc, mig or tig. Must have halo around drivers with 2 diagonal braces for support. Must be welded to the frame. Full center section is mandatory.

2. Door plates mandatory (plate size 1/4 x 12") must extend past front and center post unless you have door bars.

3. When no frame, a 6" plate musst be welded to floor and pipe welded to plate.

PROTEST

1. $150 protest for top of motor.

INSPECTION

1. Refusal to permit inspection will result in immediate disqualification.

2. Track inspectors decision will be final. NO EXCEPTIONS